Bolts M5 to M12
Nuts M4 to M12
Screws M4 to M10
All Type of Bolts M5 to M12.
All Type of Nuts M4 to M12.
All Type of Screws M4 to M10.
All Type of Washer M4 to M16.
All Type of Rivets M4 to M12.
Equipped Nut Formers‚ Header Machine and considering working in one shift‚ the installed capacity of unit is 60 MT per month (i.e. 720 MT per annum.).
The company is using the raw material as per the specification laid down by buyers (IS–Standards). The raw material used are cold heading quality 1010‚ 1015‚ 1018‚ 1020‚ 10B21‚ 15B25‚ EN8 and the same are procured from reputed companies like Mukund Limited‚ Rashtriya Ispat Nigam Limited‚ Jindal Steel Limited‚ Usha Martin Limited and Sunflag Limited etc …
| SR.NO. | MACHINE NAME | QTY | RANGE |
| 1 | HEADER MACHINE | 10 NOS | M12 TO M4 |
| 2 | ROLLING MACHINE | 7 NOS | LENGTH 10MM TO 150MM |
| 3 | TRIMMING MACHINE | 3 NOS | M12 TO M4 |
| 4 | NUT FORMER | 4 NOS | M12 TO M6 |
| 5 | NUT TAPPING MACHINE | 14 NOS | M4 TO M12 |
| 6 | POWER CRANE | 1 NOS | 5 TONNES |
| 7 | CRANE (MANUAL) | 2 NOS | 1 TONNE |
| 8 | POWER CRANE | 1 NOS | 3 TONNE |
| 9 | TUMBLING MACHINE | 1 NOS | 20 KGS |
| 10 | POWER PRESS MACHINE | 4 NO | 10 TO 75 TONNES |
| 11 | WIRE CUTTING MACHINE | 1 NOS | UTO 8MM |
| 12 | HYDRULIC PRESS MACHINE | 1 NOS | 40 TONNES |
| 13 | SEALING MACHINE | 2 NOS | 24" WIDTH |
| 14 | SHEARING MACHINE | 1 NOS | UPTO 5 mm |
| 15 | NUT DRYER | 1 NOS | 4' X 4' |
| SR.NO. | MACHINE NAME | QTY | RANGE |
| 1 | LATHE MACHINE | 1 NOS | 4.5 FEET |
| 2 | LATHE MACHINE | 1 NOS | 6 FEET |
| 3 | SURFACE GRINDER | 1 NOS | |
| 4 | BENCH GRINDER MACHINE | 2 NOS | |
| 5 | DIE POLISHER | 1 NOS | |
| 6 | BUTT WELDING MACHINE | 1 NOS | 400 AMPS |
| 7 | DRILL MACHINES | 3 NOS |
| SR.NO. | MACHINE NAME | QTY | RANGE |
| 1 | Shadowgraph | 1 | |
| 2 | Height Gauge (0–450 Mm) | 1 | Height Gauge (0–450 Mm) |
| 3 | Surface Plate.(18" x 18") | 1 | Surface Plate.(18" x 18") |
| 4 | Hardness Tester.(Model RAB–250) | 2 | Hardness Tester.(Model RAB–250) |
| 5 | Thread Ring Gauges From M3 to M12.(Go & No Go) | Thread Ring Gauges From M3 to M12.(Go & No Go) | |
| 6 | Thread Plug Gauges From M3 to M12. (Go & No Go) | Thread Plug Gauges From M3 to M12. (Go & No Go) | |
| 7 | WCP and WCR From M3 to M12. | WCP and WCR From M3 to M12. | |
| 8 | V Block. | V Block. | |
| 9 | Vernier Caliper.(1–150mm) | Vernier Caliper.(1–150mm) | |
| 10 | Pitch Micrometer. (1–25mm) | Pitch Micrometer. (1–25mm) | |
| 11 | Micrometer.(1–25mm) | Micrometer.(1–25mm) | |
| 12 | Torque Wrench (25–135 mm) | Torque Wrench (25–135 mm) | |
| 13 | Outside Micrometer (25–50 mm) | Outside Micrometer (25–50 mm) | |
| 14 | Lever Dial Gauge (0–0.12 mm) | Lever Dial Gauge (0–0.12 mm) | |
| 15 | Plunger Dial Gauge (0–10 mm) | Plunger Dial Gauge (0–10 mm) | |
| 16 | Right Angel (100 X 150 mm) | 1 | Right Angel (100 X 150 mm) |
| 17 | Right Angel (50 X 50 mm) | 1 | Right Angel (50 X 50 mm) |
